
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from a 160 mm nominal stroke to a usable window of 85-160 mm. This wide 75 mm adjustment range is ideal for machines that require frequent product-size changeovers without swapping out the actuator.
Equipped with a carbon steel piston rod and PT tapered ports, this unit includes a magnet for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts strictly as a mechanical stop to set the end position, working alongside the adjustable air cushions at both ends to decelerate the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 85-160 mm travel window during format changes on a packaging line, allowing rapid adaptation to different carton sizes without changing the cylinder.
Fine-tune the retract end-stop during machine commissioning to achieve exact positioning, compensating for mechanical tolerances without adding external stoppers.
Choose this SAIJ32X160-75-S model when your application requires a highly variable end-stop within a compact 32 mm bore. The 75 mm adjustment range lets you dial in the exact travel during commissioning, whereas a fixed-stroke SAI cylinder locks you into a single 160 mm distance.
Because the nominal stroke is 160 mm, an external guide is not strictly required for side-load support, but always ensure the load is supported on long strokes. Remember that the rear adjuster is a travel stop, not a lock; it will not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series. This SAIJ model uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR footprints. It is dimensionally interchangeable with ISO 15552 cylinders.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you mechanically shorten the 160 mm nominal stroke by up to 75 mm, creating a usable travel window of 85 to 160 mm. The adjuster acts as a stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.