
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a built-in magnet for position sensing. By turning the rear stopper screw, you can trim the effective stroke anywhere within a 65 to 165 mm usable travel window, which is ideal for dialing in exact end positions during machine commissioning.
It uses a PT G1/8 port and includes variable air cushions at both ends to decelerate the load smoothly. The extruded aluminum barrel provides sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 65-165 mm stroke window when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders or add external stopper blocks.
Fine-tune the exact retracted position during machine commissioning to perfect part ejection or clamping depth, using the rear screw to absorb mechanical tolerances.
Leverage the built-in magnet and dual sensor grooves to mount CMSE or DMSE switches precisely along the variable travel path for reliable position feedback.
The 100 mm adjustment range allows you to optimize the 65-165 mm travel window for varying product sizes without swapping the actuator. For a fixed end-stop without the adjuster mechanism, the standard SAI series is the alternative.
When ordering a replacement, verify the 165 mm nominal stroke, 100 mm adjustment code, PT G1/8 port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets. Because the stroke is 165 mm, ensure adequate external guiding if the load is heavy or subject to lateral forces. Note that the rear adjuster acts as a travel stop, not a lock; for load-holding without live air, consider the SAIL or BSAI series.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the nominal 165 mm stroke by up to 100 mm, creating a usable travel window of 65 to 165 mm. The adjuster acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.