
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 165 mm nominal stroke by up to 20 mm. This creates a 145-165 mm usable travel window, giving you exact end-position tuning at commissioning without swapping out the barrel or adding external stops.
The 12 mm carbon steel rod and M10x1.25 thread handle moderate side loads, though unsupported strokes still benefit from an external guide. The extruded aluminum barrel features sensor grooves on both sides for CMSE reed or DMSE electronic switches if you add an -S magnet later. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 145-165 mm travel window during initial commissioning to perfectly dial in the retract position without machining new hard stops.
Quickly adjust the end-stop for different package sizes on a moving line, utilizing the 20 mm rear adjustment range to adapt on the fly.
Choose this 32 mm bore when you need precise retract-end tuning on the fly, such as during product changeovers on a packaging line. Conversely, if you need less force, you would drop out of the SAIJ range entirely.
Because this is an adjustable-stroke variant rather than a fixed SAI, you can fine-tune the travel window during setup. Remember that the rear adjuster acts purely as a travel stop and the air cushions only manage deceleration; neither will hold a load without live air. For load-holding without pressure, consider a SAIL or BSAI cylinder. To match this ISO 15552 replacement, specify a 32 mm bore, 165 mm stroke, 20 mm adjustment, PT tapered ports, and your required mounting.
Quick checklist
The rear adjuster screw allows you to shorten the 165 mm nominal stroke by up to 20 mm, creating a usable travel window of 145-165 mm. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.