verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke165 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$69.54 $77.04Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30

The AirTAC SAIJ32X165-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 135-165 mm usable travel window, allowing you to dial back the 165 mm nominal stroke by up to 30 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning of CMSE reed or DMSE electronic switches.

This model uses a standard carbon steel piston rod with an M10x1.25 thread and G1/8 PT tapered ports. It supports a restricted mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard cylinders. The rear stopper functions strictly as a travel end-limit and relies on the built-in 27 mm air cushions for deceleration; it does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X165-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30 Is Used

tune

Machine Changeover

Dial in the 135-165 mm stroke window during product size changes without physically swapping cylinders or repositioning external hard stops.

precision_manufacturing

End-Position Tuning

Fine-tune the exact retract distance at machine commissioning to perfect the pick-and-place timing of small pneumatic actuators.

factory

Variable End Stops

Adapt the rear travel limit on the fly for assembly lines processing multiple part lengths within the 30 mm adjustment band.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30 the Right Cylinder?

The SAIJ32X165-30 is selected over a fixed SAI cylinder when you need to fine-tune the retract position without adding external physical stops or swapping components.

For ISO 15552 replacement matching, verify the 32 mm bore, 165 mm stroke, 30 mm adjustment range, G1/8 PT ports, and your required mounting interface. Because this is a non-magnet model, add an -S suffix if you require pneumatic position sensing. The 12 mm rod and M10x1.25 thread handle moderate side loads, but for any stroke over 300 mm, an external guide rail is recommended to prevent rod binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30 FAQ

The rear adjuster screw lets you shorten the effective stroke by up to 30 mm, creating a usable travel window of 135-165 mm. It acts as a mechanical stop for the end position and does not function as a load-holding lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X165-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.