
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-30-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 135-165 mm, allowing you to dial back the nominal 165 mm stroke by up to 30 mm during commissioning without adding external stops.
This unit includes a standard piston magnet for position detection with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel integrates sensor grooves on both sides, and the rod is constructed from carbon steel with an M10x1.25 thread. It uses a PT tapered port (G1/8) and relies on adjustable air cushions at both ends to decelerate the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 135-165 mm travel distance during machine commissioning to accommodate new product dimensions without physically swapping the actuator.
Quickly adjust the retract end-position by up to 30 mm on the line to handle varying package sizes and ensure precise physical placement.
Use the rear stopper to set exact clamping or pressing depths, relying on the 12 mm carbon steel rod to handle moderate operational side loads.
Choose this adjustable-stroke model over a fixed SAI when your setup requires variable end-stops or precise product changeovers. Conversely, you can dial down the 165 mm stroke by 30 mm to establish a strict 135 mm end-position without swapping the cylinder.
The rear adjuster acts strictly as a mechanical stop to set the travel end and does not hold the load without live air pressure. For true load-holding without continuous air, consider a SAIL pneumatic lock or an external rod lock. This SAIJ model is dimensionally interchangeable per ISO 15552 and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjuster allows you to mechanically shorten the 165 mm nominal stroke by up to 30 mm, creating a usable travel window of 135-165 mm. It acts as a physical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.