
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 165 mm nominal stroke that can be trimmed back by up to 40 mm, giving you a precise 125-165 mm usable travel window for commissioning or product changeovers without swapping the unit.
The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod features an M10x1.25 thread. It uses a PT tapered G1/8 port and variable air cushions at both ends to decelerate the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 125-165 mm end position during product size transitions without machining new hard stops.
Fine-tune the retract stroke at commissioning to perfect seating pressure against a workpiece.
Adjust the travel distance of a small diverter on the fly to handle varying package sizes.
An adjustable stroke is ideal for machines needing variable end-stops during setup, whereas a fixed SAI cylinder locks the travel distance permanently. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Because the stroke is 165 mm, side-load risks are moderate, but an external guide is still recommended for heavy lateral loads. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true position holding, select an SAIL or BSAI cylinder. This configuration uses a PT port thread and standard carbon steel rod without a magnet.
Quick checklist
A rear adjusting screw acts as an external stopper, allowing you to shorten the effective stroke from 165 mm down to 125 mm. This creates a 40 mm adjustable travel window for fine-tuning the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.