
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This compact 32mm bore unit includes a magnetic piston (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel provides sensor grooves on both sides, and the carbon steel rod with an M10x1.25 thread handles moderate side loads effectively.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-165mm travel window during format size changes on a packaging line without replacing hardware.
Fine-tune the exact retract position of a small clamping fixture during machine commissioning.
Adjust the stroke limit dynamically for testing different material thicknesses in an assembly jig.
If your setup requires less force, stepping down is not an option in this series, but stepping up to a 40mm bore yields 628N. Remember that the rear adjuster acts only as a travel stop, not a lock; to hold a load without live air pressure, consider an AirTAC SAIL or BSAI cylinder. For ISO 15552 replacement matching, specify 32mm bore, 165mm stroke, 50mm adjustment, PT tapered port thread, and the -S magnet.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the 165mm nominal stroke by up to 50mm, providing an effective travel range of 115-165mm. This stopper only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.