
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be dialed back by up to 75 mm, yielding a usable travel window of 90 to 165 mm for precise end-position tuning.
This adjustable stopper allows you to fine-tune the retract position at commissioning without swapping cylinders or adding external stops. The extruded aluminum barrel features sensor grooves on both sides for direct mounting of AirTAC CMSE or DMSE switches. It uses a PT tapered port thread, a 12 mm carbon steel rod, and offers a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90 to 165 mm travel window during format changes on packaging lines without replacing the cylinder.
Fine-tune the retract end-stop during initial commissioning to perfectly align tooling without external shims.
Create multiple retract positions within the 75 mm adjustment range for flexible assembly processes.
The 75 mm adjustment window is ideal for product changeovers requiring variable end stops, whereas a fixed SAI cylinder locks you into one exact dimension. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air.
For a seamless ISO 15552 replacement, match the 32 mm bore, 165 mm stroke, 75 mm adjustment, PT port thread, and your desired mounting bracket. Because this unit lacks the -S magnet option, it will not trigger position sensors. With a 165 mm stroke, the 12 mm rod handles moderate loads, but always support long strokes with an external guide to prevent side-loading damage.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that shortens the effective stroke. For this 165 mm nominal stroke model, you can trim the travel back by up to 75 mm, creating a usable window of 90 to 165 mm. It is a stop, not a lock, so live air is required to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.