verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke170 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$69.54 $77.04Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10

The AirTAC SAIJ32X170-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 160 to 170 mm, allowing you to dial back the nominal 170 mm stroke by up to 10 mm during machine commissioning.

Equipped with a 12 mm carbon steel rod and M10x1.25 threading, the unit handles moderate side loads effectively. The extruded aluminum barrel incorporates sensor grooves on both sides, and because no magnet is specified, position sensing would require external proximity switches rather than embedded CMSE or DMSE switches.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X170-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10 Is Used

precision_manufacturing

End-Position Tuning

Dial in the exact retract distance within a 160-170 mm window during machine setup without swapping out the entire cylinder.

conveyor_belt

Product Changeover

Quickly adjust the stroke stop by up to 10 mm to accommodate slightly different package sizes on a packaging line.

settings_input_component

Commissioning Calibration

Fine-tune the final end-of-travel position to compensate for mechanical tolerances during initial equipment calibration.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10 the Right Cylinder?

Choose this adjustable model over a fixed-stroke SAI cylinder when your assembly requires fine-tuning of the retract end-position without adding external stops. The SAIJ32X170-10 uses a PT tapered port thread and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Because the stroke is 170 mm, side-load risks are moderate, but an external guide is still recommended for optimal rod life. Remember that the rear adjuster acts purely as a mechanical travel stop; it does not lock the load or hold position without live air pressure. For true load-holding, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10 FAQ

It features a rear adjusting screw that allows you to shorten the effective stroke by up to 10 mm. This provides a usable travel window of 160 to 170 mm, letting you set the exact retract end-position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X170-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.