
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 170 mm stroke with an extensive 100 mm adjustment range, yielding a usable travel window of 70 to 170 mm.
This variant includes a standard magnet (-S) for use with AirTAC CMSE reed and DMSE solid-state sensors housed in the dual-side barrel grooves. It uses a PT tapered port and a 12 mm carbon steel rod with an M10x1.25 thread. The rear adjuster serves as a travel stop for fine-tuning end positions during commissioning, but it does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 70 to 170 mm during product size changeovers without replacing the cylinder or adding external stops.
Fine-tune the retract stroke at commissioning to perfect seating against a part, using the rear screw to absorb setup tolerances.
Select this 32 mm bore cylinder when an application requires significant on-the-fly end-position tuning across a 70 to 170 mm window, avoiding the need to physically swap cylinders for varying product sizes. Conversely, if your force needs are lower, confirm if a smaller frame suffices.
As an ISO 15552 profile cylinder, it is dimensionally interchangeable with standard ISO 15552 cylinders, utilizing a PT port and supporting mountings from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. For applications requiring the load to be held mechanically without continuous air pressure, this standard adjuster cylinder is insufficient; consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
At 0.7 MPa, the push force increases to 563 N. It operates at a speed range of 30-800 mm/s.
The rear adjuster acts as a travel stop that lets you mechanically shorten the 170 mm nominal stroke down to as little as 70 mm. It creates a 70-170 mm usable window for fine-tuning end positions at commissioning, but it is a stop, not a lock, and cannot hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.