
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 160 to 170 mm, enabling precise end-position tuning during commissioning without external stops.
This variant includes a standard carbon steel piston rod and a -S magnet for position sensing. It works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. The fluid porting uses a PT tapered G1/8 thread, and the assembly features variable air cushions at both ends to decelerate the travel.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 160-170 mm window during initial machine commissioning without swapping physical cylinders.
Quickly adjust the end-stop to accommodate minor size variations when switching between product runs on a packaging line.
Select this 32 mm bore adjustable cylinder when an application requires exact end-stop calibration rather than a fixed 170 mm stroke. The rear adjuster screw acts strictly as a travel stop to set the retract position, meaning it will not hold a load without continuous live air pressure. For true pneumatic locking without air, consider the SAIL or BSAI series instead.
This model is dimensionally interchangeable per ISO 15552 and is configured with a PT G1/8 port, a 160-170 mm travel window, and the -S magnet option. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 170 mm stroke exceeds 300 mm? No, at 170 mm it remains compact, but always ensure the 12 mm carbon steel rod is protected from excessive side loads in longer unsupported setups.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm. This creates a usable travel window of 160 to 170 mm, letting you fine-tune the end position at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.