
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 170 mm nominal stroke that can be dialed back by up to 20 mm, giving you a precise 150-170 mm usable travel window for fine-tuning end positions at commissioning.
This variant features a standard carbon steel piston rod and a magnetic piston (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which mount cleanly into the dual-side sensor grooves on the extruded aluminum barrel. The integrated rear adjuster acts purely as a mechanical stop to set the retract end position; it does not lock or hold the load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 150-170 mm retract position during line changeovers without adding external stopper blocks or changing the cylinder.
Perfect for light-duty assembly stations needing precise end-position tuning to compensate for mechanical wear or sensor drift over time.
Quickly adapt clamping or ejection distances on a packaging line by turning the rear adjuster screw to shorten the stroke.
Choose this 32 mm bore adjustable-stroke cylinder when your setup requires variable end-stops or frequent product-size changeovers without physically swapping the cylinder body. If your application demands higher thrust, stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N. The SAIJ32X170-20-S uses a PT tapered port thread and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR foot and pivot options. Because the 170 mm stroke is relatively short, side-load stress on the 12 mm rod is minimal, though external guidance is still recommended for heavy lateral loads. To replace an ISO 15552 cylinder, match the 32 mm bore, 170 mm stroke, 20 mm adjustment, PT port, and mounting footprint.
Quick checklist
At the maximum 1.0 MPa operating pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective stroke by up to 20 mm, creating a 150-170 mm travel window. It acts as a mechanical stop to fine-tune the end position; it does not lock the load in place without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.