
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 140-170 mm usable travel window, allowing you to dial back the 170 mm nominal stroke by up to 30 mm during commissioning.
This variant includes a magnet for CMSE and DMSE sensors and features a carbon steel rod with PT tapered ports. The rear adjuster acts purely as a travel stop for fine-tuning product changeovers, not as a load-holding lock. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 140-170 mm travel window during product size changeovers without swapping the cylinder or bolting on external stops.
Dial in the exact retract distance on light-duty assembly stations using the rear stopper, ensuring precise placement of 402 N class components.
Leverage the integrated magnet with DMSE electronic or CMSE reed switches to confirm the adjusted end-position in automated control systems.
The integrated magnet enables position feedback via CMSE reed or DMSE electronic switches. For load-holding without live air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is strictly a stop.
To match this ISO 15552 replacement exactly, verify the 170 mm stroke, 30 mm adjustment range, PT port thread, and the required mounting bracket. The 12 mm carbon steel rod handles standard loads, but for any stroke over 300 mm, an external guide is recommended to prevent side-load wear.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop, allowing you to shorten the 170 mm nominal stroke by up to 30 mm, creating a 140-170 mm usable travel window. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.