
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 170 mm nominal stroke, yielding a usable travel window of 130 to 170 mm. This built-in adjustability allows you to dial in the retract end-position precisely during commissioning without adding external stops.
The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. The 12 mm carbon steel rod and M10x1.25 thread provide a robust interface for standard loads. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations. The PT tapered port threads match the G1/8 air connection standard.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance from 130 to 170 mm during machine setup to achieve perfect positioning without swapping hardware.
Quickly adapt the cylinder stroke on packaging lines handling varying product sizes by adjusting the rear stopper screw.
Dial in the exact 32 mm bore thrust and travel limit for delicate pressing or clamping operations at commissioning.
If you need less force, stepping down is not an option in this series minimum, but stepping up to a 40 mm bore increases output to 879 N. The SAIJ32X170-40 is selected over a fixed SAI cylinder when a product line requires variable end-stops or frequent changeovers. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. For this 170 mm stroke, an external guide is recommended to manage side loads on the 12 mm rod. To match this ISO 15552 interchangeable cylinder exactly, specify the 32 mm bore, 170 mm stroke, 40 mm adjustment, PT port, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 402 N.
The rear adjuster screw allows you to trim the effective stroke by up to 40 mm. This creates a usable travel window between 130 mm and 170 mm, letting you set the exact retract end-position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.