
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 130-170 mm usable travel window, allowing you to trim the 170 mm nominal stroke by up to 40 mm during commissioning.
This variant features a carbon steel piston rod and PT tapered ports. The integrated -S magnet supports position sensing via AirTAC CMSE reed or DMSE electronic solid-state switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130-170 mm travel window during format changes on packaging lines, avoiding the need to physically swap cylinders for different package sizes.
Fine-tune the retract position during machine commissioning to achieve exact mechanical alignment without adding external shims or stopper blocks.
Leverage the built-in -S magnet with DMSE electronic sensors to confirm the adjusted end-of-stroke position in automated control systems.
Select this 32 mm bore when an application requires exact end-position tuning without fabricating external stops, offering a simpler setup than a fixed-stroke SAI cylinder. Because this model features a 170 mm stroke, the 12 mm rod diameter handles moderate side loads, though long unsupported strokes still require an external guide. For a true ISO 15552 replacement match, verify the 170 mm stroke, 40 mm adjustment range, PT port thread, and -S magnet requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 563 N. The maximum allowable operating pressure is 1.0 MPa.
The rear adjuster acts as a mechanical stop that shortens the effective travel from the 170 mm nominal stroke down to a minimum of 130 mm. It sets the retract end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.