
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This yields a usable window of 120-170 mm, letting you dial in the exact end position during commissioning without adding external stops.
Equipped with a magnet for position sensing, this unit works seamlessly with AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. It uses a 12 mm carbon steel rod with an M10x1.25 thread and G1/8 PT tapered ports. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 120-170 mm travel window on the fly when swapping product sizes on a packaging line, eliminating the need to physically swap cylinders for different parts.
Dial in the exact retract distance during commissioning using the rear screw stopper, perfecting the pick-and-place motion without disassembling the fixture.
Set distinct end-stops for multiple operations on the same station, using the 50 mm adjustment range to accommodate different component heights on the fly.
An adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, whereas a fixed SAI cylinder is better for static, unchanging travel limits. Note that the rear adjuster acts purely as a mechanical stop and does not hold the load without live air—use a SAIL or BSAI cylinder for true locking. For a 170 mm stroke, the 12 mm rod handles moderate side loads, but always guide the load externally to prevent rod binding. To match this ISO 15552 replacement, specify: 32 mm bore, 170 mm nominal stroke, 50 mm adjustment, G1/8 PT ports, standard carbon rod, and a -S magnet.
Quick checklist
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the 170 mm nominal stroke by up to 50 mm, creating a usable travel window of 120-170 mm. It only sets the end position and deceleration; it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.