
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 95-170 mm, allowing you to dial back the 170 mm nominal stroke by up to 75 mm during commissioning.
This extruded aluminum profile cylinder includes PT tapered port threads (G1/8) and variable air cushions at both ends. The rear adjuster acts strictly as a travel stop for end-position tuning, not a lock, meaning it cannot hold a load without live air pressure. For position holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 95-170 mm travel window during product size transitions on a packaging line without replacing the cylinder.
Use the rear screw to fine-tune the retract end-position precisely during commissioning, avoiding mechanical hard stops.
Choose this 32 mm bore cylinder when an application requires 345 N of pull force at 0.5 MPa and significant on-the-fly stroke modification. The 75 mm adjustment range is excellent for product changeovers, eliminating the need to swap cylinders or bolt on external stops. If your setup requires less adjustment range, a SAIJ32X170-10 or SAIJ32X170-20 offers a tighter travel window.
To match this ISO 15552 interchangeable cylinder for a replacement, verify the 170 mm stroke, 75 mm adjuster, G1/8 PT port, and standard carbon steel rod. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the stroke is under 300 mm, side-load risks are moderate, but an external guide is still recommended for heavy lateral loads.
Quick checklist
The rear adjuster screw lets you shorten the effective travel by up to 75 mm. This creates a usable stroke window of 95 to 170 mm, allowing you to set the exact retract end-position without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.