
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 175 mm travel back by up to 100 mm. This yields a highly flexible 75-175 mm usable window, perfect for dialing in exact end positions during machine commissioning without swapping out hardware.
Because the adjuster acts purely as a mechanical stop at the retract end, it does not lock the load or hold position without live air pressure; for true load-holding you would need a SAIL or BSAI variant. This 32 mm bore profile cylinder runs at speeds of 30-800 mm/s, features variable air cushions at both ends, and offers the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract end-position during setup, trimming the 175 mm stroke down to a 75 mm minimum to hit the precise datum needed for a new assembly.
Adapt a packaging line to different carton widths by adjusting the cylinder travel window on the fly, avoiding the need to physically swap out cylinders.
Use the 100 mm adjustment range to fine-tune the stopping point of a pick-and-place operation, ensuring parts seat perfectly without adding external stops.
Choose this specific 32 mm bore model when your application requires a wide range of motion tuning, as the 100 mm adjustment code provides the maximum travel variance for this size class. The adjustable stroke is ideal for product changeovers on a line, acting as a variable end-stop instead of requiring a fixed-stroke SAI cylinder. When matching an ISO 15552 replacement, verify the 175 mm stroke, 100 mm adjuster, PT tapered ports, and the specific mounting bracket. Although the 12 mm rod handles standard loads well, always guide long unsupported strokes externally to prevent side-loading wear.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you mechanically shorten the 175 mm nominal stroke by up to 100 mm, creating a 75-175 mm usable travel window. It acts as a retract end-stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.