
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 175 mm stroke that can be dialed back by up to 100 mm, yielding a highly flexible 75-175 mm usable travel window.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet supports AirTAC CMSE reed and DMSE electronic solid-state switches for exact position detection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position from 75 to 175 mm during format size changes without physically swapping cylinders on the line.
Fine-tune the retract stop during commissioning to perfect the stroke distance for delicate picking and placing tasks.
If your setup needs less force, stepping down is not an option in this series, but stepping up to a 40 mm bore yields 628 N. The generous 100 mm adjustment range is perfect for product-size changeovers on a line, replacing the need for multiple fixed-stroke SAI cylinders.
For an exact ISO 15552 replacement match, verify the 32 mm bore, 175 mm stroke, PT port thread, and the -S magnet option. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for load-holding, consider an external rod lock or the SAIL series.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 100 mm. This creates a usable stroke window of 75 to 175 mm, allowing you to shorten the stroke without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.