
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 155 to 175 mm usable travel window, allowing you to dial back the nominal 175 mm stroke by up to 20 mm during commissioning.
This unit includes a magnet for CMSE reed and DMSE electronic sensors, which seat cleanly into the dual-side barrel grooves. The extruded aluminum body utilizes a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread, offering a solid interface for standard mounting. The rear adjuster acts purely as a travel stop to set end positions, not as a lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance within the 155-175 mm window during machine commissioning to align stops perfectly without swapping cylinders.
Quickly adjust the stroke length on a packaging line when running a slightly shorter product, saving setup time and avoiding external stop hardware.
Leverage the built-in magnet and dual-side sensor grooves to mount CMSE or DMSE switches for precise position feedback in automated assembly.
If your setup demands higher thrust, stepping up to the 40 mm bore yields 628 N, but the 32 mm frame keeps the footprint tight. The adjustable 155-175 mm window is ideal for product changeovers on a packaging line.
Because the 175 mm stroke is under 300 mm, side-load stress is manageable, though an external guide is always recommended for unsupported loads. Remember that the rear stopper and air cushions only decelerate the load; they do not hold position without live air. For true load-holding, consider the SAIL or BSAI series. This model is dimensionally interchangeable per ISO 15552 and uses PT tapered ports.
Quick checklist
At the maximum 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke from 175 mm down to 155 mm. It functions as a mechanical stop to set the end position, but it does not lock the load when air pressure is removed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.