
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 175 mm stroke that can be fine-tuned down by up to 30 mm, giving you a precise usable travel window of 145 to 175 mm.
This model features a carbon steel piston rod with an M10x1.25 thread and uses a PT tapered G1/8 port. Adjustment is handled via a rear stopper screw that sets the retract end position without requiring external stops. The adjuster acts purely as a travel stop and does not hold the load without live air; for position holding, a SAIL or BSAI variant is required. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 145-175 mm travel window to accommodate new product sizes on a packaging line without physically swapping cylinders.
Fine-tune the retract stop during initial commissioning to perfect the alignment of tooling and avoid hard mechanical crashes.
Dial in the exact pusher distance on a sorting conveyor where the physical destination varies by product type.
The adjustable 145-175 mm window allows you to dial in the retract distance on the fly without swapping out the cylinder. Because the stroke is 175 mm, ensure your mounting arrangement handles the inherent side-loading of the extended rod.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 175 mm nominal stroke, 30 mm adjustment range, PT G1/8 port, and required mounting bracket. This SKU uses a standard carbon steel rod and does not include a magnet for sensors; if you need position feedback, select an -S variant to use with AirTAC CMSE reed or DMSE electronic switches.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its 175 mm nominal length down to 145 mm. This creates a 145-175 mm travel window for fine-tuning at commissioning, but it does not lock the position without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.