
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 145-175 mm usable travel window, allowing you to dial back the nominal 175 mm stroke by up to 30 mm during machine setup.
This SAIJ variant includes a magnet for position sensing, compatible with CMSE reed and DMSE electronic sensors. It uses a 12 mm carbon steel rod with an M10x1.25 thread, and features PT tapered porting (G1/8). The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting set omits FB, CA, CB, and CR options in favor of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 145-175 mm window during commissioning to perfect pick-and-place movements without swapping hardware.
Quickly adapt the cylinder's effective stroke on packaging lines when handling slightly different carton sizes, minimizing machine downtime.
Precisely set the travel end-stop for delicate pressing or clamping tasks where a fixed 175 mm stroke might apply too much travel or bottom out.
If your process needs less force, stepping down to a 25 mm bore yields lower thrust, while stepping up to a 40 mm bore provides 628 N. The adjustable stroke is perfect for product changeovers, letting you fine-tune the 145-175 mm travel window precisely.
To replace an ISO 15552 cylinder, match the 32 mm bore, 175 mm stroke, 30 mm adjustment, PT port, and -S magnet. Remember that the rear adjuster acts only as a travel stop, not a load lock; it cannot hold a load without live air. For position holding without pressure, consider an external pilot-operated check valve or a related SAIL lock cylinder.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 175 mm down to 145 mm. This creates a 145-175 mm adjustable window for fine-tuning the end position at commissioning, but it acts only as a stop and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.