
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 135-175 mm usable travel window, letting you dial back the 175 mm nominal stroke by up to 40 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch mounting.
This model uses a PT G1/8 port and M10x1.25 rod thread. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position during commissioning without adding external stops. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 135-175 mm travel window during product size transitions to set precise retract stops without physically swapping cylinders on the line.
Fine-tune the final retract position during commissioning using the 40 mm rear adjustment screw to perfect pick-and-place movements.
Leverage the integrated magnet and dual sensor grooves to mount CMSE or DMSE switches exactly where the adjusted stroke cycle ends.
If your fixture needs greater thrust, stepping up to the 40 mm bore yields 628 N, whereas dropping to a smaller profile cylinder reduces the footprint but sacrifices power. The adjustable stroke is ideal for product changeovers, allowing you to shift the end-stop by up to 40 mm without swapping the cylinder. For load-holding without live air pressure, this adjuster will not suffice as a lock; consider an AirTAC SAIL or BSAI cylinder instead. To replace an ISO 15552 cylinder, match the 32 mm bore, 175 mm stroke, 40 mm adjustment, PT G1/8 port, and the -S magnet.
Quick checklist
It operates at speeds ranging from 30 to 800 mm/s.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 175 mm nominal stroke by up to 40 mm, creating a usable travel window of 135-175 mm. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.