
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 125 and 175 mm without adding external stops.
This model omits the FB, CA, CB, and CR mounting styles, offering a focused set of ISO 15552 interfaces including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE solid-state switches if a magnet is specified later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 125 to 175 mm during machine setup to accommodate varying product lengths on the fly.
Quickly reposition the end-of-stroke stop for different packaging sizes without physically swapping the cylinder or adding shims.
The rear adjuster acts purely as a travel stop and cannot hold a load without live air pressure; if your application requires true load-holding, consider the SAIL pneumatic lock or BSAI clamp-lock series instead. Since the 175 mm stroke is below the 300 mm threshold, side-load stress is minimal, but always ensure the M10x1.25 rod thread is properly aligned.
For an exact ISO 15552 dimensional replacement, match the 32 mm bore, 175 mm stroke, 50 mm adjustment range, PT port threads, and the appropriate mounting accessory from the supported set.
Quick checklist
The external rear adjuster screw lets you shorten the effective travel from the nominal 175 mm down to 125 mm, providing a 50 mm tuning window to set the exact retract position during commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.