verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke175 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$69.54 $77.04Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75

The AirTAC SAIJ32X175-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a generous usable travel window of 100-175mm, allowing you to dial back the nominal 175mm stroke by up to 75mm during commissioning.

Equipped with a 12mm carbon steel rod and an M10x1.25 thread, the unit handles moderate side loads, though long unsupported strokes still benefit from an external guide. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. It uses the standard SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR variants.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X175-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75 Is Used

tune

Product Changeover

Quickly adapt the cylinder's effective travel length on packaging lines when switching between different product sizes, using the 75mm adjustment range to set new end positions without hardware swaps.

settings_input_component

Commissioning Fine-Tune

Nail the exact end-of-stroke position during machine setup by dialing in the rear stopper, compensating for mechanical tolerances without adding external stops.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75 the Right Cylinder?

The massive 75mm adjustment range on this specific SKU is ideal for machines that undergo frequent product changeovers, allowing you to set new variable end-stops without swapping the cylinder or bolting on external stops.

Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. For true load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder. This model uses PT tapered ports, and its dimensional footprint is fully interchangeable with ISO 15552 mounting interfaces.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75 FAQ

The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from the nominal 175mm down to as little as 100mm. It sets the travel end-point but does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X175-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.