verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke180 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$71.41 $78.91Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10

The AirTAC SAIJ32X180-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 170 to 180 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch mounting.

Equipped with a 12mm carbon steel rod and an M10x1.25 thread, this 32mm bore unit handles standard operational stresses well. The PT tapered port is G1/8, and the unit relies on variable air cushions at both ends to manage deceleration. The rear adjuster acts purely as a mechanical stop to dial in the exact end position during commissioning without adding external stops.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X180-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke180 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×180Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10 Is Used

tune

Changeover Tuning

Dial in the exact 170-180mm end-stop during machine changeovers without physically replacing the cylinder or adding external mechanical stops.

settings_input_component

Component Seating

Precisely seat delicate electronic or pneumatic components by micro-adjusting the retract position to compensate for mechanical tolerance stack-up.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10 the Right Cylinder?

The adjustable rear stopper is ideal for machine setups requiring frequent product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Remember that the rear adjuster and air cushions only set the travel end and do not hold the load without live air pressure. For secure load-holding without continuous air, consider an AirTAC SAIL or BSAI cylinder. Since this is a 180mm stroke, side-load is minimal, but always ensure the rod thread is properly aligned to prevent premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10 FAQ

It operates at a speed range of 30-800 mm/s.

The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 10mm, creating a usable travel window of 170-180mm. It is a travel stop, not a lock, and does not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X180-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.