verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke180 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$71.41 $78.91Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100

The AirTAC SAIJ32X180-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 80-180 mm, letting you dial back the 180 mm nominal stroke by up to 100 mm during commissioning.

This model uses a 12 mm carbon steel rod with an M10x1.25 thread, paired with PT tapered G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides for future CMSE or DMSE switches. It carries variable air cushions at both ends, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X180-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke180 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×180Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100 Is Used

tune

Variable End-Stop Tuning

Dial in the exact clamping position on the fly, trimming the 180 mm stroke down to 80 mm to accommodate different material thicknesses without changing hardware.

settings_input_component

Machine Setup Changeover

Quickly reconfigure automated assembly lines for new product dimensions by adjusting the rear stopper screw rather than replacing the entire cylinder.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100 the Right Cylinder?

The 100 mm adjustment range is ideal for product changeovers, replacing the need to swap cylinders or bolt on external stops. If you need more force, stepping up to the 40 mm bore yields 628 N at 0.5 MPa.

The rear adjuster acts purely as a mechanical stop and does not hold the load without live air pressure. For position holding, consider an SAIL or BSAI cylinder. Because this is a 180 mm stroke, the 12 mm rod handles normal loads fine, but long unsupported strokes still require an external guide to prevent side-load wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100 FAQ

It features a rear adjusting screw that lets you shorten the effective travel from 180 mm down to 80 mm, providing a 100 mm adjustment window. This allows fine-tuning of the retract end position without swapping the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X180-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.