Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke180 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S
The AirTAC SAIJ32X180-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 170-180 mm usable travel window, allowing you to dial back the 180 mm nominal stroke by up to 10 mm during commissioning. Delivering 402 N of push force at 0.5 MPa, it suits light-duty tasks.
This bore 32 unit features a 12 mm carbon steel rod and M10x1.25 thread. It includes a magnet for position sensing with CMSE reed or DMSE electronic switches. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S Is Used
End-Position Tuning
Dial in the exact 170-180 mm travel distance during machine commissioning without adding external stopper blocks.
Product Changeover
Quickly adjust the retract stop for varying part sizes on a single line using the rear adjustment screw.
Light-Duty Positioning
Move small jigs or fixtures with 402 N of force while relying on standard ISO 15552 mounting interfaces.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S the Right Cylinder?
Choose this 32 mm bore if your application requires 402 N push force at 0.5 MPa with a need for precise end-position tuning. If you need more thrust, stepping up to the 40 mm bore yields 628 N. The rear adjuster acts as a travel stop for fine-tuning product changeovers, not as a lock; for load-holding without live air, select the SAIL or BSAI series instead.
This SAIJ32X180-10-S is dimensionally interchangeable per ISO 15552. It features a PT tapered port (G1/8), a 12 mm rod, and an integrated magnet (-S). With a 180 mm stroke, the 12 mm rod handles moderate loads, but always use an external guide for lateral stability.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm, creating a 170-180 mm travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without live air.
At 0.5 MPa, it provides 402 N of push force and 345 N of pull force. The -S suffix indicates a built-in magnet for use with AirTAC CMSE reed and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.