
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 160-180 mm usable travel window, allowing you to dial in the exact retract position without adding external stops.
This model features a 12 mm carbon steel rod with an M10x1.25 thread, sized to handle moderate side loads. It includes variable air cushions at both ends to decelerate the motion smoothly. The extruded aluminum barrel carries sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160-180 mm retract position during commissioning without installing external physical stops on the machine frame.
Quickly adapt the cylinder travel window on a packaging line when switching to a different product size or format.
An adjustable stroke is ideal for machine setup and product changeover, letting you fine-tune the end position at commissioning rather than swapping a fixed-stroke SAI cylinder. The rear adjuster acts only as a travel stop and does not hold the load without live air; for true position holding, consider an external rod lock or the SAIL series. For an exact ISO 15552 replacement, match the 32 mm bore, 180 mm stroke, 20 mm adjustment, PT port, and your required mounting and magnet options.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the effective stroke by up to 20 mm, creating a 160-180 mm usable travel window. It functions as a mechanical stop to set the end position and is not a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.