
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 180 mm stroke that can be fine-tuned down by up to 20 mm, giving operators a precise 160-180 mm usable travel window during commissioning.
This variant includes a magnet for position sensing and uses a standard carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel features sensor grooves on both sides, allowing you to easily mount AirTAC CMSE reed or DMSE electronic solid-state switches along the stroke. The PT tapered port is G1/8, and the cylinder relies on adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 160-180 mm travel window during product size changes without physically swapping the cylinder or adding mechanical shims.
Fine-tune the exact retracted position of a small pneumatic clamp or pick-and-place head at commissioning using the rear adjustment screw.
Choose this 32 mm bore adjustable cylinder when your application requires exact end-position tuning without adding external stops or swapping components. If your setup needs slightly more thrust, stepping up to the 40 mm bore raises the 0.5 MPa push force to 628 N, but the 32 mm bore is ideal where space is tight. The rear adjuster allows you to dial in the 160-180 mm travel window on the fly during product changeovers.
For ISO 15552 replacement matching, verify the 180 mm stroke, 20 mm adjustment range, PT G1/8 port, and the -S magnet option. Mounting choices include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 180 mm, the 12 mm rod handles side loads adequately, though long unsupported strokes should always use an external guide. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm. This creates a 160-180 mm usable travel window, letting you fine-tune the end position at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.