
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 150-180 mm usable travel window, allowing you to dial back the 180 mm nominal stroke by up to 30 mm during commissioning.
This variant includes a standard carbon steel rod and PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides, and the -S magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state switches. The rear stopper screw sets your end-position, but remember it is a travel stop, not a load lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 150-180 mm end-stop during initial machine commissioning without machining custom spacers.
Quickly adjust the retract end-position on packaging lines when switching between different product sizes.
Choose this 32 mm bore adjustable cylinder when an application requires fine end-position tuning without swapping components or adding external stops. Conversely, if you need less force, dropping to a smaller bore reduces physical footprint. The SAIJ32X180-30-S uses a G1/8 port, PT threads, and accepts mounting accessories from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552 standards.
Because the 180 mm stroke is under 300 mm, side-load stress on the 12 mm rod is moderate, though long unsupported strokes still require an external guide. For applications requiring the cylinder to hold a load without live air pressure, note that neither the rear adjuster nor the variable air cushions act as a brake; instead, specify an AirTAC SAIL pneumatic lock, BSAI clamp-lock, or an external pilot-operated check valve.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the 180 mm nominal stroke by up to 30 mm, creating a 150-180 mm usable travel window. The adjuster acts as a physical stop on the retract end, meaning it decelerates travel but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.