
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 180mm nominal stroke that can be dialed back by up to 40mm, creating a precise 140-180mm usable travel window for exact end-position tuning.
Because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-sided extruded aluminum barrel grooves. The rear adjuster functions purely as a travel stop to decelerate the piston alongside the standard air cushions, meaning it cannot hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 140-180mm travel window during machine setup to dial in exact retract positions without machining external stopper blocks.
Quickly adapt the end-stop on packaging lines handling varying carton sizes by rotating the rear screw instead of replacing the cylinder.
Trim the nominal 180mm stroke back by up to 40mm to perfect seating timing against a workpiece without altering the pneumatic PLC logic.
The 180mm stroke falls below the 300mm threshold where external side-load guides become mandatory, but the M10x1.25 rod thread still handles minimal lateral stress well.
An adjustable stroke is chosen over a fixed SAI cylinder when you need commissioning fine-tuning or product-size changeovers on a single line. For true load-holding without live air, this plain cylinder is insufficient—consider the SAIL pneumatic lock or BSAI clamp-lock series instead. For a direct ISO 15552 replacement match, specify the 32mm bore, 180mm stroke, 40mm adjustment, PT port, and the -S magnet, while utilizing the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The 180mm nominal stroke features a 40mm rear adjuster, creating a usable travel window of 140-180mm.
No, the rear adjuster acts only as a mechanical travel stop and the air cushions handle deceleration, but neither functions as a lock. The cylinder cannot hold a load without live air pressure; for true load-holding, use an external rod lock or the AirTAC SAIL/BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.