
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 180 mm travel that can be dialed back by up to 50 mm, creating a precise 130-180 mm usable window for fine-tuning the retract end position during commissioning.
This adjustable design eliminates the need to swap cylinders or bolt on external stoppers when product sizes change. The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod with an M10x1.25 thread handles moderate side loads. It supports standard PT tapered ports sized G1/8 and operates at speeds between 30 and 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130-180 mm travel window on the fly to accommodate different package lengths on a packaging line without changing hardware.
Fine-tune the retract stroke during machine commissioning to achieve exact positioning without adding external mechanical stops.
Use the 50 mm adjustment range to vary the retract distance for testing different pick-and-place depths in assembly fixtures.
The 50 mm adjustment range is ideal for machines running varied product lengths, allowing variable end-stops without external hardware. For strokes of 180 mm, the standard rod diameter provides sufficient support, but always guide external loads to prevent binding.
When specifying a replacement, match the 32 mm bore, 180 mm stroke, 50 mm adjuster, PT G1/8 port, and mounting style. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for positive load-holding, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm from the 180 mm nominal length, providing a usable travel window of 130 to 180 mm. It functions as a travel stop, not a lock, and requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.