
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 105 to 180 mm, allowing you to dial back the nominal 180 mm stroke by up to 75 mm during machine setup.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The carbon steel rod features an M10x1.25 thread and a 12 mm diameter, which handles moderate side loads, though long unsupported strokes still require an external guide. The rear stopper sets the travel end but does not hold the load without live air.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 105-180 mm window during commissioning without swapping physical cylinders or adding external stopper blocks.
Quickly adapt the travel end for different product lengths on a packaging line, using the 75 mm adjustment range to accommodate varying material sizes.
If your setup requires less force, stepping down means losing significant thrust, so the adjustable 105-180 mm window is best utilized where product sizes frequently change. The rear adjuster acts purely as a travel stop, not a lock, so for load-holding without live air pressure, consider an SAIL or BSAI cylinder instead.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints using the PT tapered G1/8 port. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because this is a 180 mm stroke, it remains under the 300 mm threshold where external side-load guides become strictly mandatory.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 105 to 180 mm, letting you fine-tune the retract end-position at commissioning without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.