verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke185 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$71.41 $78.91Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100

The AirTAC SAIJ32X185-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 85 to 185 mm, allowing you to dial back the nominal 185 mm stroke by up to 100 mm during commissioning.

This model features a 12 mm carbon steel rod with an M10x1.25 thread, paired with a PT tapered port and 27 mm variable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches. It uses a reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options. The rear adjuster acts purely as a travel stop for end-position tuning, not as a load-holding lock.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X185-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100 Is Used

tune

Machine Changeover

Fine-tune the retract end-stop from 85 to 185 mm to rapidly adapt automated equipment for different product sizes without changing the cylinder.

settings_input_component

End-Stop Calibration

Use the 100 mm adjustment range to compensate for mechanical wear or slight part variations over the machine's lifecycle.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100 the Right Cylinder?

Choose this 32 mm bore adjustable-stroke cylinder when you need precise end-position tuning without swapping components or adding external stops. If your application requires higher force, stepping up to a 40 mm bore increases the push force to 628 N at 0.5 MPa. Conversely, if you need to hold a load without live air pressure, a plain SAIJ will not suffice; you should look at the SAIL (air-released lock) or BSAI (clamp-lock) variants. To match this ISO 15552 replacement, verify the 185 mm stroke, 100 mm adjustment range, PT port thread, and mounting style. Since this model lacks the -S magnet option, it will not directly support CMSE or DMSE position sensing without modification.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the 185 mm nominal stroke by up to 100 mm, creating an 85 to 185 mm usable travel window. It only sets the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X185-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.