
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 185 mm nominal stroke, yielding a highly flexible usable travel window of 85 to 185 mm.
This adjustable-stroke design allows you to dial in the retract end-position precisely at commissioning without swapping the cylinder or adding external stops. The rear adjuster functions strictly as a travel stop, not a lock, meaning it cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for testing fixtures where the retract position must be tweaked repeatedly across an 85 to 185 mm window without disassembling the pneumatic circuit.
Quickly adapt automated machinery to different part sizes by winding the rear adjuster, saving downtime compared to physically replacing cylinders.
If your application requires less force, stepping down is not an option in this ISO profile range, but stepping up to a 40 mm bore provides 628 N. The generous 100 mm adjustment window is perfect for product changeovers, letting you vary the end-stop dynamically rather than relying on a fixed-stroke SAI cylinder. To match this exact ISO 15552 replacement, specify the 185 mm stroke, 100 mm adjustment, PT port, and the -S magnet.
Because the 185 mm stroke is relatively short for the 32 mm bore, side-loading is less of a concern than with longer strokes. However, the 12 mm rod and M10x1.25 thread still require alignment to prevent premature seal wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options.
Quick checklist
If you increase pressure to 0.7 MPa, the push force rises to 563 N.
The rear adjuster allows you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 85 to 185 mm, letting you fine-tune the end position at commissioning. Note that the adjuster acts as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.