
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down by up to 30 mm. This yields a usable stroke window of 155-185 mm, letting you dial in the exact end position during commissioning without adding external stops.
Equipped with a 12 mm carbon steel rod and an M10x1.25 thread, this unit handles moderate side loads, though long unsupported strokes still require an external guide. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic sensors, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract stroke within the 155-185 mm window during machine commissioning to perfect product handling without swapping cylinders.
Quickly adjust the end stop to accommodate varying package sizes on a packaging line, reducing downtime between production runs.
Use the built-in rear adjuster to set precise travel limits for assembly operations, avoiding the need to bolt on external mechanical stops.
If your setup demands greater thrust, stepping up to the 40 mm bore raises the push force to 628 N. The adjustable stroke is ideal for machine setups requiring frequent product changeovers, serving as a travel stop rather than a position lock. For applications needing true load-holding without live air pressure, consider the SAIL or BSAI series instead. This cylinder uses a PT G1/8 port.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the 185 mm nominal stroke by up to 30 mm, creating a usable travel window of 155-185 mm. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.