
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 155-185 mm usable travel window, allowing you to dial back the 185 mm nominal stroke by up to 30 mm during commissioning.
This variant includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the dual sensor grooves on the extruded aluminum barrel. It features a PT tapered port (G1/8), a 12 mm carbon steel rod, and 27 mm variable air cushions at both ends. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-position by up to 30 mm when switching between product sizes on a packaging line, avoiding cylinder swaps.
Fine-tune the 155-185 mm travel window during initial commissioning to perfectly time the mechanical sequence without external stoppers.
Use the rear screw to set precise lower-limit endpoints for delicate pressing or positioning tasks within a compact assembly fixture.
Choose this 32 mm bore adjustable cylinder when an application requires precise end-position tuning without adding external stops. For load-holding requirements without continuous air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is not a locking mechanism.
To replace an ISO 15552 cylinder, match the 32 mm bore, 185 mm stroke, 30 mm adjustment range, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Because the 185 mm stroke is relatively short, side-load stress is minimal, but the 12 mm rod still requires external guidance for heavy radial loads.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to mechanically shorten the 185 mm nominal stroke by up to 30 mm, creating a 155-185 mm usable travel window. It functions as a hard stop for end-position tuning and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.