verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke185 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$74.20 $81.70Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S

The AirTAC SAIJ32X185-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. An integrated magnet (-S) enables position sensing with CMSE reed or DMSE electronic switches.

This extruded aluminum body omits tie-rods and includes sensor grooves on both sides. The PT tapered port thread and carbon steel rod are standard, while the rear adjuster acts purely as a travel stop for end-position tuning and does not lock the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S Is Used

tune

End-Stop Calibration

Dial in the exact 145-185mm retract position during machine commissioning to perfect part seating without adding external stops.

settings_input_component

Product Changeover

Quickly adjust the stroke by up to 40mm on the rear screw to accommodate new product sizes on a packaging line.

precision_manufacturing

Sensor Mapping

Utilize the -S magnet with DMSE electronic sensors to confirm precise adjustable end-positions in automated assembly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S the Right Cylinder?

Choose this 32mm bore when an application requires precise end-position tuning without swapping cylinders, offering a 145-185mm adjustable window instead of a fixed SAI stroke. If your setup needs more thrust, stepping up to the 40mm bore yields 628N at 0.5 MPa. Because the 185mm stroke is under 300mm, side-load stress is moderate, but external guides are still recommended for heavy loads.

For exact ISO 15552 dimensional interchangeability, match the 32mm bore, 185mm nominal stroke, 40mm adjustment, PT port thread, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. If the machine requires true load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead of relying on this adjuster.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 185mm nominal stroke down to 145mm. It sets the end position but does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X185-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.