
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. Equipped with a magnet for position sensing, it works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves. The carbon steel piston rod features an M10x1.25 thread, providing a robust interface for standard attachments.
With a nominal 185 mm stroke and a 50 mm adjustment range, this unit provides a usable travel window of 135 to 185 mm. This allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 135 to 185 mm during machine commissioning to accommodate new jig lengths without disassembling the assembly.
Quickly adjust the stroke length on a packaging line to handle different carton dimensions, minimizing downtime between production runs.
Leverage the built-in magnet and dual sensor grooves to mount DMSE electronic switches for precise end-of-stroke confirmation in automated assemblies.
Choose this 32 mm bore when your application requires precise end-stop tuning on the fly, such as adapting to slightly varying product sizes on a conveyor. Conversely, dropping to a smaller bore reduces the footprint and air consumption. The integrated magnet (-S) enables direct compatibility with CMSE and DMSE sensors.
As an ISO 15552 profile cylinder, it is dimensionally interchangeable with standard ISO 15552 mounting interfaces, utilizing a PT tapered port thread. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Remember that the rear adjuster and air cushions act as travel stops and deceleration devices, not a lock; to hold a load safely without live air pressure, select an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 50 mm. This creates a usable travel window of 135 to 185 mm, allowing you to fine-tune the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.