
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 110 to 185 mm, enabling precise end-position tuning at commissioning without swapping the barrel or adding external stops.
The rear adjuster functions strictly as a mechanical stop to set the retract end, not as a load-holding lock; live air is required to maintain position. This extruded aluminum profile cylinder includes sensor grooves on both sides and operates at speeds between 30 and 800 mm/s. It supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on other variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 110 to 185 mm travel window during packaging format changes without replacing the cylinder.
Fine-tune the retract end-position precisely during commissioning to avoid adding external mechanical stops.
Adjust the stroke on the fly for small-batch assembly tasks requiring different retract distances.
The 75mm adjustment range is excellent for product-size changeovers on a line. For load-holding without continuous air pressure, this plain cylinder is insufficient; consider the SAIL (air-released lock) or BSAI (clamp-lock) variants instead. To replace this ISO 15552 cylinder, match the 32mm bore, 185mm nominal stroke, 75mm adjustment, PT tapered ports, and the specified mounting. Since the 185mm stroke is under 300mm, standard side-load management is less critical than with longer strokes, but an external guide is still recommended for heavy lateral loads.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective stroke. For this model, you can trim the nominal 185 mm stroke back by up to 75 mm, giving an adjustable travel window of 110 to 185 mm. It does not lock the load in place without live air pressure.
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.