
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 185 mm stroke that can be dialed back by up to 75 mm, creating a flexible 110-185 mm usable travel window for precise end-position tuning during commissioning.
This variant includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which seat neatly into the sensor grooves on both sides of the extruded aluminum barrel. The rear screw acts purely as a travel stop to set deceleration and end limits; it does not hold the load without live air. For load-holding requirements without continuous pneumatic pressure, an external rod lock or a related SAIL pneumatic-lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retraction point within the 110-185 mm window to accommodate different package sizes on a packaging line without changing the cylinder.
Dial in the precise stroke length for delicate positioning tasks, relying on the rear adjuster to set the travel limit rather than a fixed mechanical stop.
If your setup needs less force, stepping down is not an option in this size range, but stepping up to a 40 mm bore increases the 0.5 MPa push force to 628 N. The generous 75 mm adjustment window on this 185 mm stroke allows operators to dial in the exact retraction point without swapping cylinders or adding external stops. Remember that the adjuster only trims the travel end and does not function as a brake.
To match this ISO 15552 interchangeable cylinder exactly, specify the 32 mm bore, 185 mm stroke, 75 mm adjustment range, PT tapered port thread, and the -S magnet option. Mounting is limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the stroke is under 300 mm, side-load stress on the 12 mm rod thread is manageable, though external guides are always recommended for heavy lateral loads.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke from the nominal 185 mm by up to 75 mm, providing a usable travel window of 110-185 mm. It functions as a travel stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.