
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 180 to 190 mm, letting you dial back the 190 mm nominal stroke by up to 10 mm during commissioning.
This extruded aluminum barrel unit includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rod is carbon steel with an M10x1.25 thread, and the standard PT tapered port is G1/8. The rear adjuster acts purely as a travel stop for fine-tuning end positions without adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 180 to 190 mm end-position during initial machine commissioning without swapping cylinders or adding external stopper blocks.
Quickly adjust the retract stop by up to 10 mm to accommodate slightly different product lengths on a packaging line.
Provides a fine-tuned travel limit for low-force 563 N pick-and-place tasks where precise endpoint location is critical.
Choose this 32 mm bore adjustable-stroke cylinder when you need precise end-position tuning on a machine changeover, rather than fitting a fixed-stroke SAI. If your application requires less force, stepping down is not an option in the standard SAIJ range, but if you need more thrust, the 40 mm bore offers 879 N at 0.7 MPa. To match this ISO 15552 replacement exactly, specify the 190 mm stroke, 10 mm adjustment, G1/8 PT port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mountings.
Because the stroke is 190 mm, side-load risks are moderate, but you should still ensure proper guiding for unsupported loads. Remember that the rear adjuster is a stop, not a locking device; it cannot hold a load without live air, so for true load-holding, consider an external rod lock or a SAIL pneumatic lock cylinder.
Quick checklist
The maximum operating pressure is 1.0 MPa.
The rear adjuster screw allows you to shorten the effective stroke from 190 mm down to 180 mm. This mechanical stop fine-tunes the retract end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.