verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke190 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$74.20 $81.70Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S

The AirTAC SAIJ32X190-10-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 180 to 190 mm, allowing you to dial back the nominal 190 mm stroke by up to 10 mm during commissioning.

This variant includes a standard magnet for CMSE reed and DMSE electronic sensors, which seat cleanly into the dual-side sensor grooves on the extruded aluminum barrel. It uses a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The integrated rear stopper acts purely as a travel end-limit and does not hold the load without live air pressure; for true fail-safe holding, consider an SAIL or BSAI series cylinder.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke190 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S Is Used

tune

End-Position Tuning

Dial in the exact 180 to 190 mm retract stop during machine commissioning to perfect product seating without machining external spacers.

settings_input_component

Product Changeover

Quickly adjust the stroke end-point by up to 10 mm when running a slightly shorter assembly profile on the same line.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S the Right Cylinder?

Choose this adjustable model when your machine setup requires fine end-position tuning or product changeovers without physically swapping cylinders or adding external stops. To match this ISO 15552 replacement exactly, specify the 32 mm bore, 190 mm stroke, 10 mm adjustment, PT tapered port threads, and the -S magnet option.

Because the 190 mm stroke is relatively short, side-loading stress is minimal, though the 12 mm rod still dictates that axial load alignment be maintained. The SAIJ mounting set omits the FB, CA, CB, and CR brackets, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces to suit standard machine frames.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S FAQ

It can reach a maximum thrust of 82 kgf at 1.0 MPa.

The rear adjuster screw allows you to shorten the effective travel from 190 mm down to 180 mm. This stopper only limits the end position; it does not lock the load, so live air pressure is required to hold position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X190-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.