verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke190 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$74.20 $81.70Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S

The AirTAC SAIJ32X190-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 170 to 190 mm, allowing you to dial in the exact end position without adding external stops. In the 32 mm bore class, it delivers 402 N of pull force at 0.5 MPa and uses a G1/8 port.

This version includes a standard magnet for position sensing with CMSE reed or DMSE electronic switches. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rod has an M10x1.25 thread. It supports the reduced SAIJ mounting set, including Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke190 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S Is Used

tune

Stroke Fine-Tuning

Dial in the exact retract distance from 170 to 190 mm during machine setup to accommodate varying product sizes without swapping hardware.

settings_input_component

Changeover Adjustment

Quickly reposition the end-stop on packaging lines when switching between different package formats, reducing downtime.

precision_manufacturing

End-Position Calibration

Achieve precise mechanical alignment during initial commissioning by trimming the stroke up to 20 mm to hit the exact target.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S the Right Cylinder?

Choose this 32 mm bore when 402 N of retract force at 0.5 MPa is sufficient, or step up to the 40 mm bore for 528 N if your payload increases. The 20 mm rear adjuster is selected over a fixed SAI when you need to fine-tune the retract end during commissioning or product changeover. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true drop prevention, consider the SAIL or BSAI series. To match this ISO 15552 cylinder, specify the 32 mm bore, 190 mm stroke, PT tapered ports, and the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S FAQ

It can reach a maximum of 80 kgf at 1.0 MPa.

The rear adjuster acts as a mechanical stop that lets you shorten the 190 mm nominal stroke by up to 20 mm, creating a 170 to 190 mm usable travel window for fine-tuning.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X190-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.