
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 160-190mm, allowing you to dial in the exact retract position during commissioning without adding external stops.
This 32mm bore variant relies on 27mm variable air cushions at both ends to decelerate the piston. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160-190mm retract position during initial commissioning to perfect end-of-stroke positioning without swapping cylinders.
Quickly adjust the travel window on packaging lines when switching to a new product size, using the rear stopper for immediate recalibration.
Achieve precise end-position tuning on test fixtures by trimming the stroke up to 30mm, avoiding the need to bolt on external mechanical stops.
Choose this adjustable model over a fixed SAI when your machine setup requires variable end-stops or product-size changeovers. If you need less force, stepping down is not an option in this series, but stepping up to a 40mm bore yields 628N at 0.5MPa. For load-holding without live air pressure, this cylinder's adjuster acts only as a travel stop, so you would need a SAIL lock or BSAI clamp-lock instead. To match this ISO 15552 replacement, specify 32mm bore, 190mm stroke, 30mm adjustment, PT G1/8 port, and standard carbon steel rod.
Quick checklist
If you operate at 0.7MPa, the push force increases to 563N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 190mm nominal stroke by up to 30mm, giving a usable travel window of 160-190mm for fine-tuning at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.