verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke190 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$74.20 $81.70Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S

The AirTAC SAIJ32X190-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 160 to 190 mm, allowing you to dial back the 190 mm nominal stroke by up to 30 mm during commissioning. The integrated -S magnet enables position feedback using AirTAC CMSE reed or DMSE electronic solid-state sensors housed in the dual-side barrel grooves.

This model features a standard carbon steel piston rod with an M10x1.25 thread and G1/8 PT tapered ports. The rear adjustment screw acts purely as a mechanical stop to set the retract end-position; it does not lock the load. For tasks requiring position holding without continuous air pressure, a SAIL pneumatic lock or external check valve is required.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke190 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S Is Used

tune

Machine Setup Calibration

Fine-tune the 160-190 mm travel window during initial commissioning to perfectly align pushing forces without adding external stopper blocks.

settings_input_component

Product Size Changeover

Quickly adapt the retract end-stop by up to 30 mm when switching a conveyor line to a different product thickness.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S the Right Cylinder?

Select this 32 mm bore adjustable cylinder when an application requires precise end-position tuning without swapping out physical components. If your process needs less force, stepping down is not an option since 32 mm is the smallest SAIJ size, but if you need higher thrust, the adjacent 40 mm bore provides 628 N at 0.5 MPa. The 30 mm adjustment range is ideal for product changeovers on a packaging line where slight retract distance variations are needed.

Because this is a 190 mm stroke, it remains under the 1000 mm standard limit, but you should still ensure adequate guidance for any side loads. This SKU is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. It operates at speeds of 30-800 mm/s.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.

The rear adjuster screw lets you shorten the 190 mm nominal stroke by up to 30 mm, creating a usable travel window of 160 to 190 mm. The adjuster functions as a travel stop for end-position tuning and does not lock or hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X190-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.