
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 150 to 190 mm. It features a PT tapered port and a carbon steel piston rod.
The integrated rear adjuster allows you to fine-tune the retract end position at commissioning without adding external stops. This -S variant includes a magnet for AirTAC CMSE reed and DMSE electronic sensors, which seat neatly into the dual-side sensor grooves on the extruded aluminum barrel.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 150 to 190mm during product line changeovers without swapping out the entire cylinder.
Use the 40mm rear adjustment screw to fine-tune the end-of-stroke position during commissioning, avoiding the need for external mechanical stops.
Leverage the -S magnet and dual-side barrel grooves to mount CMSE or DMSE sensors for precise end-position feedback in automated assembly.
Choose this 32mm bore when an application requires precise variable end-stops and moderate force, stepping up to the 40mm bore (628N at 0.5 MPa) if the load demands greater thrust. The adjustable stroke is ideal for machine setups requiring frequent product changeovers, whereas a fixed SAI cylinder suits dedicated single-purpose lines. For any stroke of 300mm or more, an external guide is recommended to prevent excessive rod side-load.
To match this ISO 15552 replacement, verify the 32mm bore, 190mm nominal stroke, 40mm adjustment range, PT port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 80kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 190mm nominal stroke down to 150mm. It is used for fine-tuning end positions at commissioning, but it is not a lock and will not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.