
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 190 mm stroke that can be dialed back by up to 50 mm, creating a 140-190 mm usable travel window for precise end-position tuning during commissioning.
This model features a carbon steel piston rod with an M10x1.25 thread and uses a PT G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is configured without a magnet. It is important to note the rear adjuster functions strictly as a travel stop to decelerate the load alongside the standard air cushions; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 140-190 mm travel window during product size changes to set new end stops rapidly without replacing the cylinder.
Fine-tune the retract position at commissioning using the rear screw, perfect for aligning delicate 32 mm bore assembly operations.
Act as an adjustable diverter on a conveyor line, allowing operators to modify the 190 mm stroke limit on the fly for different package sizes.
Select this 32 mm bore cylinder when an application requires exact end-position tuning without swapping hardware or adding external stops. Conversely, if you need a smaller footprint, evaluate your force margins carefully. Because the nominal stroke is 190 mm, side-loading is minimal, but always ensure the M10x1.25 rod thread is properly aligned to prevent binding.
For a direct ISO 15552 replacement match, verify the 32 mm bore, 190 mm stroke, 50 mm adjustment range, PT G1/8 port, and your required mounting bracket from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). If the machine requires true load-holding without continuous air pressure, integrate an external pilot-operated check valve or select an AirTAC SAIL or BSAI cylinder instead of relying on the adjuster.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the 190 mm nominal stroke by up to 50 mm, providing a usable travel window of 140-190 mm. It only sets the travel end and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.