
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This allows you to dial in the exact retract end-position at commissioning without swapping hardware.
Fitted with a PT tapered port and a carbon steel rod, this unit includes a magnet (-S) for position sensing. The extruded aluminum barrel houses sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. It utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract distance from 140 to 190mm during product size transitions without installing external physical stops.
Fine-tune the exact end-of-stroke landing point during commissioning to perfect part seating or clamping pressure.
Dial in different retract depths for multi-stage assembly processes on a single line using the 50mm adjustment window.
The adjustable stroke is selected over a fixed SAI cylinder to simplify machine setup and product-size changeovers.
For replacement matching, verify the 190mm nominal stroke, 50mm adjuster, PT G1/8 port, and the -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock or the SAIL/BSAI series.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 50mm. This creates a usable travel window of 140mm to 190mm, letting you set the exact retract end-position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.